Up-conversion enhancement in Er3 +-Ag co-doped zinc tellurite glass: Effect of heat treatment

The melt quenching method was used to synthesize the Ag⁰ nanoparticles and Er^3 + ions co-doped zinc tellurite glass. The glasses were characterized by differential thermal analyzer, UV–VIS-IR absorption, photoluminescence spectroscopy and TEM imaging. Heat treatment at different annealing time intervals above the glass transition temperature was applied to reduce the Ag⁺ ions to Ag⁰ NPs. The influence of heat treatment on structural and optical properties is examined. Intense and broad up-conversion emissions of silver are recorded in the visible region. Up-conversion luminescence spectra revealed three major emission peaks at 520, 550 and 650 nm originating from ²H_11/2, ⁴S_3/2 and ⁴F_9/2 levels, respectively. An efficient enhancement in visible region is observed for samples containing silver NPs. The absorption plasmon peaks are evidenced around 560 and 594 nm. The effect of localized surface plasmon resonance and the energy transfer from the surface of silver NP to trivalent erbium ions are described as the sources of enhancement.     

Synthesis and characterization of magnetite nanocrystals

Nanocrystals of magnetite (Fe₃O₄) were prepared by sol‐gel technique. The prepared nanocrystals were characterized for phase by powder X‐ray diffraction (XRD) of the samples annealed at successively higher temperature. The magnetite phase was formed during the annealing of the synthesized powder at 400 °C for a few hours. The Fourier transform infrared spectroscopy (FTIR) was performed to analyze the functional groups in the material. The energy dispersive X‐ray diffraction (EDAX) was performed for chemical composition analysis. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques were used to analyze the morphology of nanocrystals and for estimating their average size. The results confirm the formation of Fe₃O₄nanocrystals of the sizes ∼20–50 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Stereoselective synthesis of highly O-functionalized enantiopure 2,3,4-trisubstituted tetrahydrofurans by tandem debenzylative cyclization of glycal derived 2,3-epoxy alcohols

A new and highly efficient methodology for the construction of synthetically important highly O-functionalized enantiopure 2,3,4-trisubstituted tetrahydrofurans with three contiguous stereocenters is reported.     

VUV electronic state spectroscopy of 1,1-difluoroethene and difluorochloromethane by high resolution synchrotron radiation

High resolution VUV photoabsorption spectra of 1,1-difluoroethene (C(2)H(2)F(2)) and difluorochloromethane (CF(2)HCl) are reported in the wavelength range 115-200 nm (10.8-6.2 eV). New photoabsorption features are observed in C(2)H(2)F(2) and some Rydberg and vibrational assignments are proposed for the first time. Evidence for a weak vibrational pattern in CF(2)HCl is discussed here for the first time. Absolute cross section values have been obtained allowing photolysis lifetimes to be derived in the Earth's troposphere and stratosphere.     

Monolithically integrated dye-doped PDMS long-pass filters for disposable on-chip fluorescence detection

We report the fabrication of high quality monolithically integrated optical long-pass filters, for use in disposable diagnostic microchips. The filters were prepared by incorporating dye molecules directly into the microfluidic chip substrate, thereby providing a fully integrated solution that removes the usual need for discrete optical filters. In brief, lysochrome dyes were added to a poly(dimethylsiloxane) (PDMS) monomer prior to moulding of the microchip from a structured SU-8 master. Optimum results were obtained using 1 mm layers of PDMS doped with 1200 microg mL(-1) Sudan II, which resulted in less than 0.01% transmittance below 500 nm (OD 4), >80% above 570 nm, and negligible autofluorescence. These spectral characteristics compare favourably with commercially available Schott-glass long-pass filters, indicating that high quality optical filters can be straightforwardly integrated into the form of PDMS microfluidic chips. The filters were found to be robust in use, showing only slight degradation after extended illumination and negligible dye leaching after prolonged exposure to aqueous solutions. The provision of low cost high quality integrated filters represents a key step towards the development of high-sensitivity disposable microfluidic devices for point-of-care diagnostics.     

Synthesis, optical, electrochemical, and thermal studies on triazole-based dendrimers with diphenylamine as surface group

Fréchet-type dendrimers with hole-transporting diphenylamine as surface group and electron-transporting triazole moiety as building block have been synthesized by convergent synthetic strategy through ‘click chemistry’ methodology. First generation dendrimer exhibits longer relaxation time, higher quantum yield in the fluorescence spectrum, and better thermal stability than the zero and second generation dendrimers. CV studies showed irreversible reduction potential and the formation of radical cation due to diphenylamine moiety.     

Similarity analysis of modified shallow water equations and evolution of weak waves

In this paper, we obtain exact solutions to the nonlinear system of partial differential equations (PDEs), describing the one dimensional modified shallow water equations, using invariance group properties of the governing system. Lie group of point symmetries with commuting infinitesimal operators, are presented. The symmetry generators are used for constructing similarity variables which lead the governing system of PDEs to system of ordinary differential equations (ODEs); in some cases, it is possible to solve these equations exactly. A particular solution to the governing system, which exhibits space-time dependence, is used to study the evolutionary behavior of weak discontinuities.     

Structure, magneto-structural transitions and magnetocaloric properties in Ni50−xMn37+xIn13 melt spun ribbons

Melt spun Ni_50−xMn_37+xIn₁₃ (2≤x≤5) ribbons were investigated for the structure, microstructure, magneto-structural transitions and inverse magnetocaloric effect (IMCE) associated with the first-order martensitic phase transition. The influence of excess Mn in Ni site (or Ni/Mn content) on the martensite transition and the associated magnetic and magnetocaloric properties are discussed. It was found that with the increase in Mn content, the martensitic transition shifted from 325 to 240 K as x is varied from 2 to 4, and the austenite phase was stabilized at room temperature. The x=5 ribbon did not show the martensitic transition. For the x=3 ribbon, the structural and magnetic transitions are close together unlike in the x=4 ribbon in which they are far (∼60 K) apart. The zero field cooled and field cooled curves support the presence of exchange bias blocking temperature due to antiferromagnetic interactions in the ribbons. A large change in the magnetization between the martensite and austenite phases was observed for a small variation in the Ni/Mn content, which resulted in large IMCE. A large positive magnetic entropy change (ΔS_M) of 32 J/kg K at room temperature (∼ 300 K) for a field change of 5 T with a net refrigeration capacity of 64 J/kg was obtained in the Ni₄₇Mn₄₀In₁₃ ribbon.     

Synthesis and surface modified hard magnetic properties in Co0.5Pt0.5 nanocrystallites from a rheological liquid precursor

Small crystallites of a metastable phase Co_0.5Pt_0.5 are precipitated by heating a rheological liquid precursor of cobalt–hydrazine complex and platinum chloride H₂PtCl₆·xH₂O in polymer molecules of poly(vinylpyrrolidone) (PVP) in ethylene glycol. The hydrazine co-reduces nascent atoms from the Co²⁺ and Pt⁴⁺ that recombine and grow as Co_0.5Pt_0.5. The PVP molecules cap a growing Co_0.5Pt_0.5 as it achieves a critical size so that it stops growing further in given conditions. X-ray diffraction pattern of a recovered powder reveals a crystalline Co_0.5Pt_0.5 phase (average crystallite size D∼8 nm) of a well-known Fm3m-fcc crystal structure with the lattice parameter a=0.3916 nm (density ρ=14.09 g/cm³). A more ordered L1₀ phase (ρ=15.91 g/cm³) transforms (D≥25 nm) upon annealing the powder at temperature lesser than 700 °C (in vacuum). At room temperature, the virgin crystallites bear only a small saturation magnetization M_s=5.54 emu/g (D=8 nm) of a soft magnet and it hardly grows on bigger sizes (D≤31 nm) in a canted ferromagnetic structure. A rectangular hysteresis loop is markedly expanded on an optimally annealed L1₀ phase at 800 °C for 60 min, showing a surface modified coercivity H_c=7.781 kOe with remnant ratio M_r/M_s=0.5564, and M_s=39.75 emu/g. Crystallites self-assembled in an acicular shape tailor large H_c from ideal single domains and high magnetocrystalline anisotropy of a hard magnet L1₀ phase.     

Anticipating, complete and lag synchronizations in RC phase-shift network based coupled Chua's circuits without delay

We construct a new RC phase shift network based Chua's circuit, which exhibits a period-doubling bifurcation route to chaos. Using coupled versions of such a phase-shift network based Chua's oscillators, we describe a new method for achieving complete synchronization (CS), approximate lag synchronization (LS), and approximate anticipating synchronization (AS) without delay or parameter mismatch. Employing the Pecora and Carroll approach, chaos synchronization is achieved in coupled chaotic oscillators, where the drive system variables control the response system. As a result, AS or LS or CS is demonstrated without using a variable delay line both experimentally and numerically.